AEROSHELL FLUID LGF (5 GALLON PAIL)
AeroShell Landing Gear Fluid (LGF) is a mineral hydraulic fluid (MIL-P
$280.34
Show More
AEROSHELL OILS 65, 80, 100, 120 The straight mineral AeroShell Oil range
Warehouse: ON REQUEST
Authentic
Direct from manufacturer
Fast Shipping
Nationwide US
Tech Support
Expert advice
The straight mineral AeroShell Oil range offers protection covering a wide variety of ambient take-off temperatures.
AeroShell Oils 65, 80, 100 and 120 are straight mineral oils blended from selected high viscosity index base oils. These oils do not contain any additives except for very small amounts of pour point depressant (which aids to improve fluidity at very low temperatures) and an anti-oxidant.
AeroShell Oils 65, 80, 100 and 120 are approved for all aviation piston engines of civil aircraft when the use of an oil not containing a dispersant additive is required; however, they should also be used during the break-in of a new aviation piston engine or those recently overhauled.
The specially blended High Viscosity Index base oils in AeroShell Oil 65, 80, 100 and 120 have been designed to provide effective protection to engine components compared to conventional mineral oils. This helps ensure complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls.
AeroShell Oils 65, 80, 100 and 120 are produced to meet fully the SAE specification J-1966 (Grades SAE 30, 40, 50 and 60 respectively). Furthermore, they all have military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. The blending plants employed to manufacture these oils also hold the approval of the specification authorities and this ensures that the high quality standard is always maintained.
High Viscosity Index Base Oils used in AeroShell oils maintain their viscosity and protect engine components more effectively under the high shear stresses that an engine places on lubricants.
Approved for all reciprocating engines of civil aircraft used for running-in operations or older generation engines requiring non-additive type engine oils (refer to manufacturers recommendations).
Provides Compatibility with other approved aircraft piston engine oils. Since AeroShell Oils 65, 80, 100 and 120 are fully approved to SAE J-1966 and are listed on the relevant Qualified Products List (QPL), elaborate precautions are not needed when changing from similarly approved aircraft engine oils, as long as these oils are qualified products.
AeroShell Oils are inherently stable in storage. Providing that they have been stored and handled correctly, prolonged storage does not have any effect on their quality, properties or performance.
Typical properties are available upon request.
AeroShell Oil 65, 80, 100 and 120 are unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained.
AeroShell Landing Gear Fluid (LGF) is a mineral hydraulic fluid (MIL-P
AeroShell Grease 64 comprises AeroShell Grease 33 fortifie
AeroShell Grease 7 is an advanced multi-purpose grease, composed of a
AeroShell Grease 14 is a helicopter multi-purpose grease composed of a
Aviation Oil for Light Sport Four Stroke Engines Improved
AEROSHELL TURBINE ENGINE OIL 555 AeroShell Turbine Oil 55
AEROSHELL OILS W80, W100, W120 We understand your desir
AeroShell Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporati
AeroShell Grease 22 is a versatile advanced general purpose
AeroShell Compound 07 is a de-icing fluid composed of ethylene glycol,
Our specialists are ready to recommend the perfect solution for your operation.
